Power Output - Hahnel MODUS360RT Manuel D'utilisation

Power Output Level
1/1
1/2 + 0.7
1/2 + 0.3
1/2
1/4 (+0.3, +07)
1/8 (+0.3, +07)
1/16 (+0.3, +07)
1/32 (+0.3, +07)
1/64 (+0.3, +07)
1/128 (+0.3, +07)
Number of flashes that will activate over-temperature protection in
high-speed sync triggering mode:

Power Output

1/1
1/2 (+0.3, +07)
1/4 (+0.3, +07)
1/8 (+0.3, +07)
1/16 (+0.3, +07)
1/32 (+0.3, +07)
1/64 (+0.3, +07)
1/128 (+0.3, +07)
2. Other Protections
• The system provides real-time protection to secure the device and
your safety. The following lists prompts for your reference:
Prompts LCD Panel
E1
E2
E3
E9
Meaning
A failure occurs on the recycling system so that
the flash cannot fire
Please restart the flash unit. If the problem still
exists, please send this product to a maintenance
centre.
The system gets excessive heat. Please allow a
rest time of 10 min.
The voltage on two outlets of the flash tube is too
high. Please send this product to a maintenance
centre.
Some error occurred during the upgrading
process. Please use the correct firmware upgrade
method.
29
Number of Flashes
30
40
50
60
100
200
300
500
1000
Times
15
20
30
40
50