Master Unit Setting; Slave Unit Setting; On Camera (No Wireless) Setting; Master "Group-Mode" Setting - Hahnel MODUS360RT Manuel D'utilisation

• Master Unit Setting

• Slave Unit Setting

• On Camera Setting
• Press the <
blinking.
• Turn the <Select Dial> until only the <
on the LCD panel.
• Press < SET > button
• "Master" Group - Mode setting
> button for 2 seconds so that <
• Press the <
seconds so that <
icon > is blinking.
• Turn the <Select Dial> until the
< icon> is displayed on
the LCD panel.
• Press < SET > button
• Press the <
seconds so that <
icon > is blinking.
• Turn the <Select Dial> until the
< icon> is displayed on
the LCD panel.
• Press < SET > button
wireless icon > is blinking
1) On the "
<GR> button to select groups: M,
A, B, C. The master unit is in group
M, groups A, B and C are for the
off camera slave units. Then press
the < MODE > button to select the
"Flash Mode" (OFF/TTL/M mode)
for that particular group. Repeat
this for all groups to the desired
lighting arrangement.
18
> button for 2
wireless
> button for 2
wireless
wireless icon > is
" unit, press the