Table des Matières
Publicité
Technical Data
Cordless percussion drill/driver
Art. No
Battery voltage
No-load speed
Rate of percussion under load
Torque max.
Drilling capacity max.
Drill chuck range
Weight without battery/Charging equipment
Recommended Ambient Operating Temperature
Recommended battery types
Recommended charger
Noise details
Measured according to EN 60745; Uncertainty K = 3 dB (A)
Sound pressure level L
pA
Sound power level L
WA
Wear ear protectors!
Vibration details
Vibration total values (triaxial vector sum) determined according to EN 60745, Uncertainty K = 1,5 m/s
Drilling into metal: Vibration emission value a
Impact drilling into concrete: Vibration emission value a
Screw driving without impact: Vibration emission value a
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and
may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down
or when it is running but not actually in use. This may significantly reduce the vibratory load over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
1st gear
2nd gear
1st gear
2nd gear
Steel plate
Wood
brick and tile
h,D
h,ID
h
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions Of Use
The cordless percussion drill/driver is designed for
drilling, percussion drilling, as well as screwdriving for
independent use away from mains supply.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
ENGLISH
15
BSB 20-201 24 K
58813
20 V
0 - 440 min
-1
0 - 1650 min
-1
0-7040 min
-1
0-26400 min
-1
50 Nm
13 mm
30 mm
15 mm
2 - 13 mm
1,55 kg
-18°C ... +40°C
AP 20-20, AP
20-40
LG 20-24, LG 20-35
80,8 dB(A)
91,8 dB(A)
2
1,82 m/s²
11,09 m/s²
0,92 m/s²
Publicité
Table des Matières
