Technical Data; Specified Conditions Of Use - Güde BS 12 Traduction Du Mode D'emploi D'origine

ENGLISH
14

Technical Data

Cordless Drill Driver
Cordless percussion drill/driver
Art. No
Battery voltage
No-load speed
Rate of percussion under load
Torque max.
Drilling capacity max.
Screw diameter max. (Wood)
Drill chuck range
Weight without battery/Charging equipment
Noise details
Measured according to EN 60745; Uncertainty K = 3 dB (A)
Sound pressure level L
Sound power level L
Wear ear protectors!
Vibration details
Vibration total values (triaxial vector sum) determined according to EN 60745, Uncertainty K = 1,5 m/s
Drilling into metal: Vibration emission value a
Impact drilling into concrete: Vibration emission value a
Screw driving without impact: Vibration emission value a
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and
may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down
or when it is running but not actually in use. This may significantly reduce the vibratory load over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
pA
WA
Read and understand the operating
instructions before using the
appliance. Familiarise with the
1st gear
2nd gear
1st gear
2nd gear
Steel plate
Wood
brick and tile
h,D
h,ID
h
In case of any doubts about connection and operati-
on refer please to our customer center

Specified Conditions Of Use

BS 12: The battery drill/screwdriver may be used for
drilling and screwdriving for independent use away
from mains supply.
BSB 12: The cordless percussion drill/driver is
designed for drilling, percussion drilling, as well as
screwdriving for independent use away from mains
supply.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
BS 12
BSB 12
58600 / 58601 / 58604 / 58605 /
58602 / 58603
12 V 12 V
0 - 400 min 0-400 min
-1
0 - 1300 min 0-1300 min
-1
- 0-6000 min
-
0-19500 min
25 Nm 25 Nm
10 mm 10 mm
20 mm 20 mm
- 10 mm
6 mm
0,8 - 10 mm 0,8 - 10 mm
0,8 kg 0,85 kg
83,14 dB(A) 83,14 dB(A)
94,14 dB(A) 94,14 dB(A)
2
2,39 m/s² 2,39 m/s²
- 9,56 m/s²
1,15 m/s² 1,15 m/s²
58606
-1
-1
-1
-1
6 mm