Insignia NS-C2115 Guide De L'utilisateur page 17

•
•
•
8 Press the STOP/BAND button to stop playback.
Connecting an external audio/video input device
To connect an external audio/video input device:
1 Make sure that your radio is turned off and unplugged from the
power outlet.
2 Plug the yellow connector of an audio/video cable (not included)
into the VIDEO IN jack on the left side of your clock radio.
3 Plug the left (white) and right (red) connectors of an audio/video
cable (not included) into the L and R AUDIO IN jacks on the left
side of your clock radio.
From Audio Left
(white) output
4 Plug the other end of the audio/video cable into the Video and
Audio Out jacks on the audio/video input device.
5 Plug the AC power cord into a power outlet, then press the
POWER
6 Press the FUNCTION button one or more times until AV appears
on the display.
7 Turn on the external audio device and use the device's controls to
control playback.
16
NS-C2115 Under-counter DVD Player/Clock Radio
Press one of the SKIP/CLOCK/TUNING buttons (up or
down) on the clock radio, or press one of the SKIP/TUNE
/ buttons on the remote to go to the next or
previous track on the CD.
Press one of the SKIP/CLOCK/TUNING buttons (up or
down) on the clock radio, or press one of the SKIP/TUNE
/ buttons on the remote to search for a track on the
CD.
Press the MEM/CLK SET/RAND button on the remote to
select Random playback mode.
From Audio Right
(red) output
button to turn on your radio.
www.insignia-products.com
From Video
(yellow) output