U.S. Robotics Corporation Limited Warranty
15.109 (g) Class B Radiated Emissions Limits
FCC Class B Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.this device may not cause harmful electromagnetic interference, and
2.this device must accept any interference received including interference that may cause undesired operations.
Radio and Television Interference
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of th e FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-
ment generates and uses radio frequency energy and, if not installed and used in accordance with the instructions, may cause interfer-
ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If t his equipment
does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna or cable input device.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
The user may find the following information prepared by the Federal Communications Commission helpful:
Telephone Interference Bulletin.
This document is available on the Internet through the FCC Consumer Information Bureau Home Page at http://www.fcc.gov/cib. Unde r
Consumer Information Directory - Telephone - Miscellaneous Telephone Information, select Interference to Telephones.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate this equipment.
CSA Certified
This information technology equipment is CSA-Certified for the uses described in the installation guide.
Canadian notice:
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the interference-caus-
ing equipment standard entitled Digital Apparatus, ICES-003 of Industry Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe B préscrites dans
la norme sur le matèriel brouilleur: Appareils Numériques, NMB-003 édictée par l'Industrie Canada.
Your warranty and repair service centre is:
Centre de guarantie et de service aprés vente:
U.S. Robotics
Unit-100 13751 Mayfield Pl.
Richmond, B.C. Canada V6V 2G9
Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines, and internal
metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
Caution: Users should not attempt to make electrical ground connections by themselves, but should contact the appropriate inspection
authority or an electrician, as appropriate.
U.S. Robotics Corporation Limited Warranty
HARDWARE: U.S. Robotics warrants to the end user ("Customer") that this hardware product will be free from defects in workmanship
and materials, under normal use and service, for the following length of time from the date of purchase from U.S. Robotics or it s autho-
rised reseller:
Two (2) years
U.S. Robotics's sole obligation under this express warranty shall be, at U.S. Robotics's option and expense, to repair the defec tive prod-
uct or part, deliver to Customer an equivalent product or part to replace the defective item, or if neither of the two foregoing options is rea-
sonably available, U.S. Robotics may, in its sole discretion, refund to Customer the purchase price paid for the defective produ ct. All
products that are replaced will become the property of U.S. Robotics. Replacement products may be new or reconditioned. U.S. Robotics
warrants any replaced or repaired product or part for ninety (90) days from shipment, or the remainder of the initial warranty period,
whichever is longer.
SOFTWARE: U.S. Robotics warrants to Customer that each software program licensed from it will perform in substantial conformance to
its program specifications, for a period of ninety (90) days from the date of purchase from U.S. Robotics or its authorised rese ller. U.S.
Robotics warrants the media containing software against failure during the warranty period. No updates are provided. U.S. Robotics's
sole obligation under this express warranty shall be, at U.S. Robotics's option and expense, to refund the purchase price paid by Cus-
tomer for any defective software product, or to replace any defective media with software which substantially conforms to applicable U.S.
Robotics published specifications. Customer assumes responsibility for the selection of the appropriate applications program and associ-
ated reference materials. U.S. Robotics makes no warranty or representation that its software products will meet Customer's require-
ments or work in combination with any hardware or applications software products provided by third parties, that the operation of the
software products will be uninterrupted or error free, or that all defects in the software products will be corrected. For any t hird-party prod-
ucts listed in the U.S. Robotics software product documentation or specifications as being compatible, U.S. Robotics will make reason-
able efforts to provide compatibility, except where the noncompatibility is caused by a "bug" or defect in the third party's pro duct or from
use of the software product not in accordance with U.S. Robotics/'s published specifications or User Guide.
THIS U.S. ROBOTICS PRODUCT MAY INCLUDE OR BE BUNDLED WITH THIRD-PARTY SOFTWARE, THE USE OF WHICH IS
GOVERNED BY A SEPARATE END-USER LICENSE AGREEMENT. THIS U.S. ROBOTICS WARRANTY DOES NOT APPLY TO
SUCH THIRD-PARTY SOFTWARE. FOR THE APPLICABLE WARRANTY, PLEASE REFER TO THE END-USER LICENSE AGREE-
MENT GOVERNING THE USE OF SUCH SOFTWARE.
OBTAINING WARRANTY SERVICE: Customer must contact a U.S. Robotics Corporate Service Centre or an Authorised U.S. Robotics
Service Centre within the applicable warranty period to obtain warranty service authorisation. Dated proof of purchase from U.S. Robot-
ics or its authorised reseller may be required. Products returned to U.S. Robotics's Corporate Service Centre must be pre-authorised by
U.S. Robotics with a Service Repair Order (SRO) number marked on the outside of the package, and sent prepaid and packaged appro-
1 2