Robotics Wireless Maxg Pci Adapter Installation; Prepare For Installation - U.S.Robotics USR5417 Wireless MAXg PCI Adapter Guide D'installation

U.S. Robotics Wireless
Package Contents:
USR5417 Wireless MAXg PCI Adapter Detachable antenna
Quick Installation Guide
Note: You must have administrator rights on your computer in order to install this
product.

Prepare for installation

During the Installation procedure, you may be prompted for your Windows Operating system CD-
ROM. Make sure you have it available in case you need it.
For the most updated information, visit: http://www.usr.com/support
You can also refer to the User Guide on the U.S. Robotics Installation CD-ROM for more detailed
information.
Be sure to find out what letter your CD-ROM drive uses before you begin installing your new
product. You will need to know this to properly install your software.
If you are installing only a Wireless MAXg PCI Adapter, go to the
section entitled Installing JUST the Wireless MAXg PCI Adapter.
Installing BOTH a Wireless MAXg PCI Adapter
Wireless MAXg Router
Step One: Connect the Wireless
A. Turn off your computer and your cable or DSL modem. Dis-
connect the modem's Ethernet cable from your computer
and connect it to the WAN port of the Wireless MAXg
Router.
B. Connect the supplied Ethernet cable to the Network Interface Card of your computer and to
one of the LAN ports of the Wireless MAXg Router.
C. Connect the antenna to the Wireless MAXg Router.
D. Connect the power adapter to the Wireless MAXg Router and to a standard wall power out-
let. Turn on your computer.
MAX
g PCI Adapter Installation
Installation CD-ROM which includes User Guide
MAX
g Router
the
and
1