Regulatory Approvals - U.S.Robotics USR8000A Guide D'installation

Masquer les pouces Voir aussi pour USR8000A:

Guide d'installation (134 pages)

Guide d'installation (102 pages)

Table Des Matières

Table des Matières

Les langues disponibles

I do not know if my assigned IP Address is Static or Dynamic.

Possible Solution:

If you have Cable or DSL service, you most likely have a Dynamic IP address. You should always

check with your service provider to verify this information, since some providers will assign Static IP

addresses. If you have a Dynamic IP address, select Dynamic IP Address in the WAN Setup area of

the Configuration Utility and the Broadband Router will automatically obtain the information it needs

from your service provider. If you have a Static IP address, select Static IP Address in the WAN

Setup area of the Configuration Utility. You will need to refer to the network connection information you

collected earlier and manually enter this information.

My Cable or DSL service is not working, but I need to access the Internet.

Possible Solution:

If you have an external analogue modem and dial-up Internet service, you can still access the Internet.

Connect the external analogue modem according to the procedure described in this Guide. Open a

Web browser and type http://192.168.123.254 to access the Configuration Utility. Click Setup , WAN ,

and then select Dial-up Modem . Enter the appropriate information for your dial-up Internet Service

Provider settings.

While trying to check my network configuration settings in Windows Me or

XP, I can't find the Network icon.

Possible Solution:

The default setting in Windows Me and XP is to not show all of the icons within the Control Panel. Click

Windows Start , Settings, and then Control Panel. Within Control Panel, click View all Control Panel

options on the left side of the screen. All the Control Panel icons should now be visible.

Are You Still Having Problems?

1. Call the dealer who sold you this U.S. Robotics product.

The dealer may be able to troubleshoot the problem over the phone or may request that you bring the

product back to the store for service.

2. Call the U.S. Robotics Technical Support Department.

Technical questions about U.S. Robotics products can also be answered by technical support special-

ists.

Country

Voice

United States (801) 401-1143

http://www.usr.com/support/s-contact.asp

Canada

(801) 401-1145

http://www.usr.com/international.asp

Argentina

AT&T Direct + (877) 643-2523

Brazil

AT&T Direct + (877) 487-6253

Mexico

AT&T Direct + (877) 643-2523

Chile

AT&T Direct + (877) 643-2523

Colombia

AT&T Direct + (877) 643-2523

Costa Rica

AT&T Direct + (877) 643-2523

Peru

AT&T Direct + (877) 643-2523

Puerto Rico

AT&T Direct + (877) 643-2523

Venezuela

AT&T Direct + (877) 643-2523

For current support contact information, go to the following Web site:

http://www.usr.com/