Technical Data - Grizzly ELS 2801 Profi Mode D'emploi

GB

Technical Data

Leaf blower.....................
Rated input voltage................... 220-240V,
Input power ................................... 2800 W
Safety class ......................................
Protection category........................... IP 20
Air capacity .......................max. 17 m
Air speed ...........................max. 320 km/h
Shredding rate ...........................max. 10:1
Content of the collection bag ...............50 l
Weight (incl. accessories kit) ...........5.5 kg
Sound pressure level
(L ) ............ 86.0 dB(A); K
pA
Sound power level (L
measured ... 101.0 dB(A); K
guaranteed .............................105.0 dB(A)
Vibration (a )
n
at the handle ................................. 4.6 m/s
at the additional grip ................3.4 m/s
Noise and vibration values were deter-
mined according to the standards and
stipulations designated in the Declaration
of Conformity.
Noise and Vibration: The operating condi-
tions during measuring and the procedures
used for measuring in accordance with
EN 15503, Appendix A, Appendix B.
Technical and optical changes can be
carried out in the course of the further
development without announcement. All
measures, references and information
contained in this operating manual are
therefore without guarantee. Legal claims,
which are made on the basis of the operat-
ing manual, cannot be considered.
This device is designed for operation on
a power supply network with a system
impedance Zmax at the transfer point
134
ELS 2801 Profi
50/60 Hz
/min
3
= 3.0 dB(A)
pA
)
WA
= 2.0 dB(A)
wA
K=1.5 m/s
(domestic connection) of a maximum of
0.28 Ohms.
The user must ensure that the device is
operated only on a power supply network
that fulfils this requirement. If necessary,
the local power supply company can be
/ II asked for the system impedance.
2
2;
2