1. Manuels
  2. Marques
  3. StarTech Manuels
  4. Racks et supports
  5. CPUWALLMNT
  6. Guide de l'utilisateur

StarTech CPUWALLMNT Guide De L'utilisateur

Masquer les pouces
Table des Matières

Publicité

Liens rapides

Télécharger ce manuel
CPU Wall Mount
CPUWALLMNT
FR: Guide de l'utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l'uso - it.startech.com
For the latest information, technical specifications, and support for
this product, please visit www.StarTech.com/CPUWALLMNT.
Manual Revision: 06/26/2017
*actual product may vary from photos

Publicité

Table des Matières
loading

Manuels Connexes pour StarTech CPUWALLMNT

Sommaire des Matières pour StarTech CPUWALLMNT

  • Page 1 CPU Wall Mount CPUWALLMNT *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l’uso - it.startech.com For the latest information, technical specifications, and support for this product, please visit www.StarTech.com/CPUWALLMNT.
  • Page 2 StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby...
  • Page 3 Warning statements Dichiarazioni di avvertenza Make sure that you assemble this product according to the instructions. Assicurarsi di Assemblare il prodotto secondo le istruzioni. Read the entire manual and make sure that you understand the instructions before you start to assemble Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni prima di iniziare ad assemblare and use this product.
  • Page 4 Advertencias de uso Asegúrese de ensamblar este producto según las instrucciones. Lea todo el manual y asegúrese de haber comprendido bien las instrucciones antes de proceder con el ensamblaje y el uso de este producto. Nunca opere o ponga en funcionamiento este producto si faltan piezas o hay daños en las mismas. Asegúrese de no exceder la capacidad de peso de este producto.

  • Page 5: Table Des Matières

    Table of Contents Warnings ....................i Product dimensions ................1 Product diagrams ...................2 Package contents ...................3 Requirements ..................4 Disassemble the CPU mount ..............4 Mount the rear bracket to the wall ............5 Reassemble the CPU mount ..............8 Position the adjustable straps .............9 Insert the CPU ..................10 Technical support ...................12 Warranty information ................12 Instruction manual...

  • Page 6: Product Dimensions

    Product dimensions 990 mm (39 in.) Instruction manual...

  • Page 7: Product Diagrams

    Product diagrams Strap slot Strap slot Mounting holes Strap slot Front bracket Rear bracket Thumbscrew Adjustable straps (not included) Front bracket Instruction manual...

  • Page 8: Package Contents

    Package contents CPU mount Adjustable straps Qty: One Qty: Two Wall anchors Screws Qty: Three Qty: Three Thumbscrews Instruction manual Qty: Two Qty: One Instruction manual...

  • Page 9: Requirements

    Requirements • Wrench Requirements are subject to change. For the latest requirements, please visit www.StarTech.com/CPUWALLMNT. Disassemble the CPU mount 1. Use a wrench to remove the two M6 nuts from the bottom of the CPU mount. (figure 1) Note: You can discard the M6 nuts because you won’t need to use them to assemble or mount the CPU mount.

  • Page 10: Mount The Rear Bracket To The Wall

    2. Separate the front bracket from the rear bracket. (figure 2) Note: Put the washers in a safe place because you will need to use them later in the assembly process. figure 2 Front bracket Rear bracket Washers Mount the rear bracket to the wall Warning! Wall structures vary, and it is important to make sure that the type of structure and mounting hardware that you are using will properly support the mounted equipment.
  • Page 11 1. Position the rear bracket where you want to hang the CPU wall mount and make sure that the rear bracket is level. 2. Use the three mounting holes in the rear bracket as a template and mark the wall. (figure 3) figure 3 Wall...
  • Page 12 4. Thread the end of the adjustable strap with the folded edge through one of the strap slots on the rear bracket. (figure 5) figure 5 Adjustable strap Folded edge Rear bracket 5. Repeat steps 3 and 4 to attach the other adjustable strap. 6.

  • Page 13: Reassemble The Cpu Mount

    Reassemble the CPU mount 1. Take the washers that you removed when you disassembled the CPU mount and thread them onto the bolts in the front bracket. 2. Place the bolts in the front bracket into the slots in the rear bracket. 3.

  • Page 14: Position The Adjustable Straps

    Position the adjustable straps 1. Thread the end of one of the adjustable straps through the corresponding strap slot on the front bracket. 2. Fold the adjustable strap back on itself and thread the end of the strap upwards through the first slot in the buckle and then downwards through the second slot in the buckle.

  • Page 15: Insert The Cpu

    Insert the CPU Warning! Do not exceed the weight capacity of this product. Overloading this product might result in injury or property damage. This product can support the following weight: 22 lb. (10 kg). Warning! Before you add equipment to this product, make sure that you have properly assembled and installed it, and that the product can support the weight of the equipment that you are adding to it.
  • Page 16 2. Adjust the straps until they fit snugly against the CPU. 3. Open the clasps on the adjustable straps and pull the end of the adjustable straps through the clasps. 4. Close the clasps. (figure 10) figure 10 Buckle Clasp Instruction manual...

  • Page 17: Technical Support

    Limitation of liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
  • Page 18 StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.

Table des Matières