NEC MultiSync WD551 Manuel D'installation page 5

For proper installation it is strongly recommended to use a trained
service person.
7
Failure to follow the standard installation procedures could result in
damage to the product or injury to the user or installer.
Please install the product in accordance with the following information.
This product cannot be used or installed without the table top stand or
other mounting accessory for support.
When transporting, moving, or insalling the product, please use as
many people as necessary to be able to lift the product without causing
personal injury or damage to the product.
We recommend two or more people for the WD551.
Please refer to the instructions included with the optional mounting
equipment for detailed information about attaching or removing.
Do not cover the vent on the product. Improper installation of the
product may result in damage to the product, an electric shock or fire.
8
Do not install the product in the locations below:
• Poorly ventilated spaces.
• Near a radiator, other heat sources, or in direct sunshine.
• Continual vibration areas.
• Humid, dusty, steamy, or oily areas.
• Outdoors.
• High-temperature environment where humidity changes rapidly and
condensation is likely to occur.
• A ceiling or wall that is not strong enough to support the product and
mounting accessories.
Do not mount the product upside down.
WARNING
English-3
EN