NEC MultiSync WD551 Manuel D'installation page 4

Masquer les pouces Voir aussi pour MultiSync WD551:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 123
Unplug the power cord if the product malfunctions.
Should the product emit smoke or strange odors or sounds, or if the
product has been dropped or the cabinet broken, turn off the product's
power, then unplug the power cord from the power outlet. Failure to
1
UNPLUG
do so could not only lead to fire or electric shock, it could also result in
THE POWER
vision impairment. Contact your dealer for repairs.
CORD
Never try to repair the product on your own. Doing so is dangerous.
Do not open or remove the product's cabinet.
Do not disassemble the product.
There are high voltage areas in the product. Opening or removing
2
product covers and modifying the product may expose you to electric
shock, fire, or other risks.
Refer all servicing to qualified service personnel.
Do not use the product if it has structural damage.
If you notice any structural damage such as cracks or unnatural
wobbling, please refer servicing to qualified service personnel. If the
3
product is used in this condition, the product may fall or cause personal
injury.
Handle the power cord with care. Damaging the cord could lead to fire
or electric shock.
• Do not place heavy objects on the cord.
• Do not place the cord under the product.
• Do not cover the cord with a rug, etc.
4
• Do not scratch or modify the cord.
• Do not bend, twist or pull the cord with excessive force.
• Do not apply heat to the cord.
Should the cord be damaged (exposed core wires, broken wires, etc.),
ask your dealer to replace it.
Do not touch the power plug if you hear thunder. Doing so could result
5
in electric shock.
Please use the power cord provided with this product in accordance
with the power cord table.
If a power cord is not supplied with this product, please contact NEC.
For all other cases, please use the power cord with the plug style
6
that matches the power socket where the product is located. The
compatible power cord corresponds to the AC voltage of the power
outlet and has been approved by, and complies with, the safety
standards in the country of purchase.
WARNING
English-2

Publicité

Table des Matières
loading

Table des Matières