Package Contents; Product Dimensions; Technical Specifications; Installation Guide - Bose Professional DesignMax DM8C Notice D'installation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
PRO.BOSE.COM

Package Contents

×1

Product Dimensions

409 mm
16.1 in

Technical Specifications

For additional specifications, see the DesignMax DM8C technical
data sheet at PRO.BOSE.COM.
Physical
Product Dimensions
Hole cutout
Maximum Ceiling
Thickness
Net Weight,
Loudspeaker with grille
Net Weight, Tile Bridge
Shipping Weight
Installation Guide • DesignMax DM8C
×1
Grille diameter: 409 mm (16.1 in)
Enclosure diameter: 342 mm (13.5 in)
Backcan depth: 241 mm (9.5 in)
349 mm (13.75 in)
76 mm (3.0 in)
9.57 kg (21.1 lb)
1.00 kg (2.2 lb)
12.70 kg (28.0 lb)
×1
255 mm
10.0 in
241 mm
9.5 in
76 mm
3.0 in

Important Installation Information

It is the installer's responsibility to ensure installation of
the loudspeakers and mounting system is performed in
accordance with all applicable codes, including local
building codes and regulations. Consult the local authority
having jurisdiction before installing this product.
It is the responsibility of the installer to ensure the safety
of the loudspeaker installation. Failure to properly install
the loudspeaker could result in damage, injury, or death.
Do not mount the product in locations where
condensation may occur.
This product is not intended for installation or use in
indoor water facility areas (including, without limitation,
indoor pools, indoor water parks, hot tub rooms, saunas,
steam rooms and indoor skating rinks).
Do not mount on surfaces that are not sturdy, or that
have hazards concealed behind them, such as electrical
wiring or plumbing. If you are not sure about installing the
bracket, contact a qualified professional installer. Ensure
the bracket is installed according to local building codes.
Do not use hydrocarbon based solvents, lubricants or
cleaning agents of any type on or around this loudspeaker
and associated mounting hardware during installation.
Exposure to such substances can lead to degradation of
the plastic material, resulting in cracking and creating a
falling hazard.
×2
342 mm
13.5 in
Overview
×1
English • 3

Publicité

Table des Matières
loading

Table des Matières