Functional Description; General - HYDAC ELECTRONIC HAT 1400 CAN Notice D'utilisation

10

3 Functional Description

HAT 1400 is an absolute measuring singleturn angle sensor for highly precise rotational
angle measurement in mobile machines. During measurement, the angle change as well
as the turning direction of the rotation of two mechanical components towards one
another will be detected.
The functioning method of the angle sensor is based on contactless magnetic scanning.
The sensor system consists of two components: the permanent magnet which is
mounted free of backlash inside of the shaft, and the sensor component.
By means of four Hall sensor elements integrated in the sensor component, the sensor
E
detects the rotational angle of the shaft. An intelligent electronic evaluation unit converts
the value into an electrical signal.
The digitized measured value or the J1939 is provided to the CAN field bus system via
the CANopen protocol.

4 General

The HAT 1000 angle sensor series are subjected to individual calibration and final testing
on a computer operated test station. They are maintenance-free and operate perfectly
when used according to the specifications (see Technical Data).
However, if there is a cause for complaint, please contact HYDAC Service. Interference
by anyone other than HYDAC personnel will invalidate all warranty claims.
The EDS file and its corresponding protocol description can be downloaded from our
internet site using the path:
→Products→Sensors→Product search
http://www.hydac.com/uk-en/products/sensors/show/Material/index.html
Entering the part number (9xxxxx) the corresponding ZIP file appears
(HAT-file_9xxxxx_ HAT1XXX–XXX–XXXX–XXX–XXXX–XXX-000.ZIP),which contains the
EDS files and their respective protocol descriptions.
If you have any queries regarding technical details or the suitability of the unit for your
application, please contact our Technical Sales Department.
Edition: 2021-02-18 HYDAC ELECTRONIC GMBH
HAT 1400 CANopen
Part No.: 669987