Proper Use - HYDAC ELECTRONIC HAT 1400 CAN Notice D'utilisation

8

2.7 Proper use

The measuring system is used for the measurement of the rotational angle and to
condition the measured data for the subsequent control of mobile control procedures.
The following fields of use are especially forbidden:
 environments where there is an explosive atmosphere
 medical purposes
E
WARNING !
Edition: 2021-02-18
Where there is a danger of physical injury and damage to property arising
from jerking displacement of the measuring system !
- Even though the measuring system does constitute a safety
component, a plausibility check of the measuring system values
must be performed through the downstream control system.
- It is mandatory for the operator to integrate the measuring system
into his own safety concept.
HYDAC ELECTRONIC GMBH
HAT 1400 CANopen
Part No.: 669987