Vortice REG FILTER Notice D'emploi Et D'entretien page 33

Table des Matières

Les langues disponibles

Record 19: Connectivity errors [read / write].

Bit 0: Wifi connection error.

Bit 1: Connection error with the server.

Default value: 0 [0].

This record is not saved in EEPROM.

Record 20: Time programming [read / write].

0: Schedule disabled. Manual mode.

1: Schedule activated. Programming mode.

Default value: 0 [Schedule deactivated].

Record 21: Day (current date) [read / write].

The value that is sent is the value of the day (0 to 6) in 16-

bit binary. 0 Monday

1 Tuesday

2 Wednesday

3 Thursday

4 Friday

5 Saturday

6 Sunday

Default value: 0 [Monday].

This register is not saved in EEPROM, although it remains in the RTC for approximately 1 week without voltage (the regulator

integrates a su- percap that acts as a temporary battery to save the time).

Record 22: Hour: Minutes (current date)

[read / write]. High byte: Hour.

The value that is sent is the time value (0h to 23h) in 16-bit binary.

Default value: 0 [0h].

Low byte: Minutes.

The value that is sent is the value of the minutes (0min to 59min) in 16-bit binary.

Default value: 0 [0min].

This register is not saved in EEPROM, although it remains in the RTC for approximately 1 week without voltage (the regulator

integrates a su- percap that acts as a temporary battery to save the time).

Record 23: Start time schedule period 1 MONDAY (hour: minutes) [read / write].

0xAAAA: Time not defined ( ----- ).

High byte: Hour.

The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.