Vortice REG FILTER Notice D'emploi Et D'entretien page 25

REG FILTER REGULATOR TIME SCHEDULE
To access the hourly programming mode, in normal operating mode press MODE continuously (approx. 2s) until the user menu
appears on the screen (date setting, hourly programming, identifier, parameters, reset of the G4 filter operating time, reset of the
H14 filter operation and regulator reset). With the UP and DOWN keys select PrOG and press MODE, accessing at that time the
time programming mode.
Note: During time programming mode, the regulator does not communicate on the serial communication channel.
In time programming mode the functions of the buttons are as follows:
- ON/OFF:
Short press: Exits the time programming mode.
Long press (~1s): Copy the programming of the previous day to the current day. The icon is displayed as confirmation of the copy of
the day.
- MODE: Select the period (day, periods 1 and 2, and reduced period), and the setpoints for those periods..
- GO UP / GO DOWN: Modify the time value and the corresponding setpoint.
Displays in schedule mode:
Time schedule example:
25