Instruction manual Compressor Mod. C660/100 - E480/100 - E660/100
Rev. 01 - 07/2014 -
The machine can be connected to the mains electrical supply by plugging the power cable into the special socket (13).
tHE PoWER SUPPlY nEtWoRK to WHiCH tHE aPPlianCE iS ConnECtED MUSt ConFoRM to tHE lE-
GiSlation CURREntlY in FoRCE in tHE CoUntRY oF USaGE, ConFoRM to tHE tECHniCal SPECiFiCa-
tionS PRoViDED in PaRaGRaPH 2 anD BE EQUiPPED WitH a SUitaBlE "Plant EaRtHinG" SYStEM.
all MatERialS USED FoR ElECtRiCal ConnECtion MUSt BE SUitED to tHE intEnDED USaGE, laBEllED
WitH "CE" iF SUBJECt to tHE loW VoltaGE DiRECtiVE 2006/95/CE anD ConFoRM to tHE REQUiREMEntS
aS SPECiFiED in tHE lEGiSlation CURREntlY in FoRCE in tHE CoUntRY oF aPPlianCE USaGE.
DiSREGaRD FoR tHE aBoVE DESCRiBEDWaRninGS MaY lEaD to iRREPERaBlE DaMaGE to tHE aPPlianCE
ElECtRiCal SYStEM anD SUBSEQUEntlY WaRRantY EXPiRY.
tHE ManUFaCtURER DEClinES anY RESPonSiBilitY FoR FaUltS oR anoMoliES WitH aPPlianCE oPERa-
tion CaUSED BY ElECtRiCal PoWER SURGES in aDDition to tolERanCES BY tHE SUPPlY EntitY (VoltaGE
± 10%, FREQUEnCY ± 2%).
WHERE nECESSaRY, ConnECt tHE aPPlianCE EXClUSiVElY to tHE ElECtRiCal SUPPlY GEnERatoR WitH
PoWER GRtEatER tHan tHE inStallED ElECtRiCal PoWER (SEE PaRaGRaPH 2), in oRDER to SUPPoRt tHE
PoWER-DRaWat StaRt-UP.
18. AIR PIPE (ExTENSION) AND UTENSILS CONNECTION
1) Connect the utensil to the air pipe (extension).
2) Connect the air pipe (extension) to the appliance air outlet (tank or regulator) spigot (rif. 6-6a).
tHE ManUFaCtURER DEClinES anY RESPonSiBilitY FoR DaMaGE to PERSonS, aniMalS anD oBJECtS
CaUSED BY tHE inoBSERVation oF tHE aBoVE DESCRiBEDWaRninGS.
aiR PiPES (EXtEnSion), ConnECtionS anD UtEnSilS WHiCH ConFoRM to tHE ManUFaCtURER'S
inStRUCtion ManUalS MUSt BE USED.
tHE USE oF UnSUitaBlE aiR PiPES (EXtEnSionS), ConnECtionS anD UtEnSilS anD/oR tHoSE WHiCH Do
not CoMPlY WitH lEGilation CURREntlY in FoRCE iS StRiCtlY FoRBiDDEn.
6a
C660
12
17. ELECTRICAL CONNECTION
6
13
6
E480 - E660