Preparing For Saw Operations; Switch Activation - Bosch CM8S Mode D'emploi

BM 2610025580 05-13_BM CM8S 5/17/13 1:37 PM Page 23

Switch Activation

For safety, the switch lever is designed to prevent
accidental starts. To operate safety switch, slide the
switch "Lock-OFF" release button with either thumb to
disengage the lock, then pull the power switch trigger
and release the switch "Lock-OFF" release button
(figure 26). When the power switch trigger is
released, the switch "Lock-OFF" release button will
engage the power switch trigger automatically, and
the lever will no longer operate until either "Lock-Off"
release button is engaged again.
NOTE: Power switch trigger can accommodate a
padlock with a long shackle of up to 3/16" in diameter
(not provided with miter saw) to prevent unauthorized
use.

preparing for Saw Operations

Switch "lock-Off"
FIG. 26
Release Button
power
Switch
Trigger
23.
padlock
Hole