De Dietrich DTE1110W Guide D'installation Et D'utilisation page 20

INSTRUCTIONS FOR THE INSTALLER
MAINTENANCE
Replacing the power supply cable
If the power supply cable should be replaced,
Fig.10
type HO5VV-F or H05RR-F, complying with the
regulations in force.
The connection to the terminal board must be
effected as shown in fig.10:
it is necessary
brown cable L
to use a cable
blue cable N
with a section
green-yellow cable
o f 3 x 0 . 7 5 m m
2
for the version
all gas and 3x1
m m f o r t h e
2
version mixed,
8
(phase)
(neutral)
(ground)