Tv Soundconnect - Samsung HW-H600 Mode D'emploi

FUNCTIONS

TV SOUNDCONNECT

You can enjoy TV sound through your SoundStand connected to a Samsung TV that supports the TV SoundConnect
function.
+ Connecting a TV to the SoundStand
1. Turn on the TV and SoundStand.
Set the "Add New Device" menu of the TV to "On".
•
2. Press the ( ) button on the main unit's top panel or
the SOURCE button on the remote control to select
the TV mode.
3. On the TV, a message asking whether to enable the TV
SoundConnect function. "[Samsung] SoundStand" is
displayed on the TV screen.
4. Select <Yes> to finish connecting the TV and
SoundStand.
● Switching the SoundStand's mode from TV to
another automatically terminates TV
SoundConnect.
● To connect the SoundStand to another TV, the
existing connection must be terminated.
● Terminate the connection to the existing TV,
then press the
for 5 seconds to connect to another TV.
● The TV SoundConnect (SoundShare) function is
supported by some Samsung TVs released from
2012 on. Check whether your TV supports the TV
SoundConnect (SoundShare) function before you
begin. (For further information, refer to the TV's
user manual.)
● If your Samsung TV is released before 2014,
check the SoundShare setting menu.
● If the distance between the TV and
SoundStand exceeds 5m, the connection may
not be stable or the audio may stutter. If this
occurs, relocate the TV or SoundStand so that
they are within operational range, and then
re-establish the TV SoundConnect connection.
Connect
button on the remote control
● TV SoundConnect Operational Range
- Recommended pairing range: within
50cm
- Recommended operational range: within
5m
● PLAY, NEXT, PREV and STOP buttons are
not operable in TV SoundConnect mode
+ Using the Bluetooth POWER On
function
After the TV and the SoundStand have been connected
using TV SoundConnect, if you set the Bluetooth Power
On function on, the SoundStand will turn on and off
automatically when you turn the TV on or off.
1. Connect the TV with your SoundStand using the TV
SoundConnect function.
2. Press the Bluetooth POWER button on the
SoundStand remote. "BLUETOOTH POWER ON"
appears on the SoundStand's display.
BLUETOOTH POWER ON : The SoundStand
•
turns on and off when you turn the TV on or off.
BLUETOOTH POWER OFF : The SoundStand
•
only turns off when you turn the TV off.
● This function is supported only by some
Samsung TVs released from 2013 on.
● If the SoundStand is connected to a TV
through TV SoundConnect, and you turn the
SoundStand off by turning off the TV, the
Bluetooth Power function will not turn the
SoundStand on, even if you connect another
Bluetooth device to it.
18