Installing Batteries In The Remote Control - Samsung HW-H600 Mode D'emploi

REMOTE CONTROL
You can turn the volume down to 0 with the push of a button. Press
again to restore the sound to the previous volume level.
Press SOUND EFFECT on the remote control to select a sound
mode. Select the STANDARD mode if you want to enjoy the original
sound. We recommend that you select a Sound Effect mode based on
If there is more than one file on the device you are playing, and you
press the # button, the previous file is selected.
Press the Bluetooth POWER button on the remote to turn the
If the SoundStand is connected to a digital TV and the video appears
out of synch with the audio, press the Audio Sync buttons to synch the
Press the AUDIO SYNC +/- buttons to set the audio delay from 0 to
300 ms. In USB mode, TV mode, or BT mode, the Audio Sync

+ Installing Batteries in the Remote Control

1. Use a coin to turn the
remote control cover
counterclockwise to
remove it as shown in the
figure above.
Turns the SoundStand on and off.
Adjusts the volume level of the unit.
SOUND EFFECT
the source material and your personal taste.
Bluetooth POWER
Bluetooth Power function on and off.
See pages 16 and 18 for details.
audio with the video.
function may not work.
2. Insert a 3V lithium battery. Keep the positive
(+) pole facing up when inserting the battery.
Put the battery cover on and align the ' '
marks side by side as shown in the figure
above.
POWER
MUTE
VOLUME
Skip Back
AUDIO SYNC
10
POWER
SOURCE
MUTE
WOOFER
VOL
LEVEL
Surr.
Sound
SOUND DIMMER
EFFECT
SYNC
SYNC
Bluetooth
REPEAT
POWER
3. Use a coin to turn the
cover clockwise as far as
it will go to fix it in place.