Cleaning And Maintenance - Medisana RC 420 Mode D'emploi

Shiatsu massage
p
Lower button (lower back)
e
The Shiatsu massage heads travel up and down the lower half of the back in
a circular motion. The reversal of the direction takes place when the respec-
tive end positions are reached.
Upper button (upper back)
i
The Shiatsu massage heads travel up and down the upper half of the back in
a circular motion. The reversal of the direction takes place when the respec-
tive end positions are reached.
Full button (full back)
r
The Shiatsu massage heads move from the "Park" position to the lower
back, massaging the back in a circular motion whilst doing so. Once the un-
dermost position has been reached, the direction of the massaging heads is
reversed and the heads then travel up to the top of the backrest. Once the
heads reach this point, the direction of rotation is reversed again and then
travel down the back again.
UP/DOWN buttons are used for individual positioning of the massage
qo
heads during shiatsu massage. Press and hold the button to move the
massage heads to the postion you like. The massage heads will stay there
and rotate.
Rolling massage
9
Depending on your choice the massage heads move along the full back
(Full button ), the lower back (Lower button
r
ton ). In contrast to Shiatsu massage the massage heads will not rotate.
i
Press WIDTH button to change spacing of massage heads during rolling
w
massage.
Press the buttons again to deactivate the massage functions.
p/9
FAST /SLOW button
ut
You can choose the speed of the massage with these two buttons: fast (+) and
slow (-).
Timer button
a
With the timer button, you can determine the length of the massage. Press button
to switch the timer to 5 minutes (the LED "5" lights up). Pressing the button
a
again switches the timer to 10 minutes (the LED "10" lights up). Pressing the but-
ton once more switches the timer to 15 minutes (the LED "15" lights up).
) or upper back (Upper but-
e

4.1 Cleaning and maintenance

• Before cleaning the device, make sure that it is turned off and the
mains plug is removed from the socket. Allow the unit to cool down.
Only clean the massage seat cover with a soft cloth slightly dampe-
ned with a mild detergent (e.g. soap suds).
• Under no circumstances should you use aggressive detergents,
strong brushes, solvents, petrol, thinners or alcohol. These could
damage the surface.
• When cleaning, never immerse the unit in water and make sure that
no water gets into the unit.
• Wait until the device is completely dry before using it again.
• Undo any kinks in the cable.
4.2 Disposal
This product must not be disposed of together with domestic
waste. All users are obliged to hand in all electrical or electro-
nic devices, regardless of whether or not they contain toxic
substances, at a municipal or commercial collection point so
that they can be disposed of in an environmentally acceptable
manner. Consult your local authority or your supplier for infor-
mation about disposal.
4.3 Technical specifications
Name und Modell : MEDISANA Massage Chair RC 420
Stromversorgung : Mains adaptor
Type: YJS060D-1203500G
Input: 100- 240 V~ 50/60 Hz, 1500 mA
Output:
Power consumption : 42 W
Dimensions : approx. 70 x 67 x 103 cm
Weight :
approx. 15 kg
Item number : 88412
EAN number : 40 15588 88412 2
Loadable up to 150 kg
In accordance with our policy of continual product improvement,
we reserve the right to make technical and visual changes without notice.
The current version of this instruction manual can be found under www.medisana.com
3 Operating / 4 Miscellaneous
12 V 3.5 A
GB
9