Technical Description; Notes On The Electrical Connection - Dometic GROUP WAECO PerfectView CAM604 Instructions De Montage Et De Service

PerfectView CAM604
6

Technical description

The colour camera with integrated microphone is encased in an aluminium
housing and transmits image and sound to a monitor via a cable. The infrared
LEDs improve night vision.
The camera can switch between long-distance and close area. The long-
distance mode shows the space behind the vehicle as if you were looking
through a rear window. The close area mode switches on when you engage
the reverse gear and shows the space directly behind the vehicle.
I
NOTE
The cameras is equipped with a reverse display at the factory.
Any monitor that is connected therefore needs a normal picture
function.
The camera consists of the following elements:
No. in
Designation
fig. 9, page 5
1 6-pin connection cable
2 Lens
3 Microphone
4 Infrared LEDs
7

Notes on the electrical connection

7.1 Laying cables
A
NOTICE! Beware of damage
 When drilling holes, check beforehand that there is sufficient
space on the other side for the drill head to come out.
 Cables and connections that are not properly installed will
cause malfunctions or damage to components. Correct instal-
lation of cables and connections ensures lasting and trouble-
free operation of the retrofitted components.
 The cables may not be exposed for long periods to solvents
such as benzene, since solvents can damage the cable.
EN
Technical description
31