HEIDENHAIN ND 1200 QUADRA-CHEK Guide D'installation page 16

ND 1200 QUADRA-CHEK
Installation Instructions
Operating Instructions available at www.heidenhain.de
Connecting an encoder
This product can be used with linear and rotary encoders that provide digital TTL level
signals or 1Vpp signals. The connecting cable must not exceed 30 meters in length.
To connect an encoder cable:
Verify that the power switch is in the off position
X X
Connect the interface cable to its connector
X X
Tighten the cable connector screws until they are snug
X X
Connecting an RS-232-C cable
This product provides an RS-232 connection for PC communication. For more information
on RS-232 communications, refer to the ND 1200 QUADRA-CHEK Operating Instructions.
To connect an RS-232 cable:
Verify that the power switch is in the off position
X X
Connect the interface cable to its connector
X X
Tighten the cable connector screws until they are snug
X X
Connecting an audio cable
This product provides a 3.5 mm connector for use with headphones or speakers.
To connect an audio cable:
Verify that the power switch is in the off position
X X
Insert the audio cable into the connector
X X
Connecting a USB cable
This product provides a USB connection for printer and data storage device
communication. For more information on USB communications, refer to the
ND 1200 QUADRA-CHEK Operating Instructions.
To connect a USB printer or data storage device:
Verify that the power switch is in the off position
X X
Insert a printer USB (type A) cable or a USB data storage device into the products USB
X X
port
Connecting a foot switch or remote keypad
This product provides an RJ-45 foot switch/remote keypad connection for use with a
HEIDENHAIN foot switch (ID 681041-01) or HEIDENHAIN remote keypad (ID 681043-01).
To connect an RJ-45 foot switch/remote keypad cable:
Verify that the power switch is in the off position
X X
With the cable connector locking tab aligned with the connector, insert the cable
X X
connector into the interface connector until the tab locks into place
16
10
1 Vpp connector
TTL connector
11
RS-232-C connector
12
Audio connector
13
USB connector
14
Foot switch/remote keypad
connector