Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Recommended Installation Height: 1.2 m (4 ft) above the ground.
1
Shut off the electricity at the breaker that controls the
Shut off the electricity at the breaker that controls the
doorbell's circuit.
doorbell's circuit.
3
Insert the mini-level into the mounting plate, and
Insert the mini-level into the mounting plate, and
mark the drill points when its bubble stays centered.
mark the drill points when its bubble stays centered.
Mini-Level
Remove the mini-level when drill points are marked.
Doorbell Installation
2
(Optional) If the wall is uneven, paste the plate foam to the
(Optional) If the wall is uneven, paste the plate foam to the
mounting plate.
mounting plate.
4
Drill holes according to the drill points, and insert anchors.
Drill holes according to the drill points, and insert anchors.
Recommended Hole Depth: 25 to 30 mm (1 inch to 1.2 inch).
4
Anchor
Publicité
Table des Matières
