HIKVISION DS-HD1 Installation Rapide page 7

• If you have a mechanical chime installed in your home, install the power kit and doorbell.
• If you have an electronic chime installed in your home, refer to its manual to install the power kit, and install the
doorbell.
• If no chime is installed, skip power kit installation, install the doorbell, and follow
1
Shut off the electricity at the breaker that controls the Shut off the electricity at the breaker that controls the
doorbell's circuit. doorbell's circuit.
3
Remove the cover from your mechanical chime.
Power Kit Installation
2
Insert one end of the wire harness into the power kit.
4
2
Option B
Remove the existing chime wires from the terminals
named TRANS and FRONT.
REAR TRANSF RONT
on page 5.
REAR