Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Use AP Mode for Wi-Fi Configuration
-For AP hotspot configuration, press the Reset button for 5 seconds, and then you will hear a voice prompt.
-Wait for a few seconds, until you see the LED indicator flashing blue.
-Follow the voice prompt to connect Wi-Fi.
-Go back to the Hik-Connect app after successful connection. Tap Next.
-Search out the Wi-Fi you want the device to connect to, and enter password.
SD Card Management
In the Hik-Connect app, tap the Storage Status
1. In the Hik-Connect app, tap the
1.
2. 2. If the card status displays as
If the card status displays as Uninitialized
The status will then change to Normal
The status will then change to
Wi-Fi Name: softap_XXXXXXXXX (9-digit Serial No.)
Default Password: softap_XXXXXX (Verification Code)
eg. Default Password: softap_ABCDEF
Serial No. and verification code are listed on the cover of this manual.
Storage Status in the Device Settings interface to check the SD card status.
in the Device Settings interface to check the SD card status.
Uninitialized, tap to initialize it.
, tap to initialize it.
Normal, and it can store videos and/or pictures.
, and it can store videos and/or pictures.
8
Publicité
Table des Matières
