Disposal - Kemper MiniFil Mode D'emploi

7 Disposal

During disposal comply with
Chapter 2.4 Safety Instructions for the Operating Personnel
Chapter 2.5 Safety Instructions for Maintenance and Troubleshooting
Special safety instructions indicated for individual activities in this chapter.
WARNING
Follow legal obligations throughout all activities related to using
the MiniFil device to prevent generation of waste and ensure
proper recycling/disposal!
Disassembly works shall be carried out with utmost care to avoid stirring up dust on
the MiniFil device and injury to unauthorized personnel. Therefore, it is necessary to
disassemble the device in a well-ventilated room with filtered exhaust air or a suitable
mobile filtration unit. The work area should be separated / marked. Raised dust
should be immediately extracted by vacuum cleaner of dust class H.
During the work it is necessary to use personal protective equipment such as
protective clothing, gloves and breathing apparatus with incorporated fan, etc., so as
to avoid contact with hazardous dust.
Before disassembly the unit must be cleaned and freed of all dust. This should be
achieved using an industrial vacuum cleaner of dust class "H".
At the beginning of the disassembly the embedded filters are removed and disposed
in an enclosed plastic bag. Then the loose dust is extracted during the disassembly.
Individual parts can then be divided by material and disposed by an authorized
company.
Finally, it is necessary to clean the work area.
- 63 –
Technical changes and errors reserved.
KEMPER MiniFil Instruction Manual - EN