Signs And Labels Required To Be Installed By The Operator; Safety Instructions For The Operating Personnel - Kemper MiniFil Mode D'emploi

KEMPER MiniFil Instruction Manual - EN

2.3 Signs and labels required to be installed by the operator

The operator is required to apply other signs and labels on the MiniFil device or at its
proximity.
These signs and labels may be - for example - related to regulations on the use of
personal protective equipment.

2.4 Safety instructions for the operating personnel

Before using the MiniFil device the user must be informed about handling of the
device and the materials and tools via information, instructions and training.
MiniFil device may only be used in perfect technical condition, in accordance with its
purpose of use, subject to the safety requirements and taking into account all
hazards and this manual! All malfunctions, especially those that may jeopardize
safety, must be rectified immediately!
Any person responsible for commissioning, operation or maintenance of the device
must be made thoroughly familiar with this instruction manual and understand its
content - in particular paragraph 2 Safety. During operation is too late for this.
This especially applies to staff that only works with the MiniFil device occasionally.
Instruction manual must always be at hand near the MiniFil device.
We are not liable for any damages and accidents caused by failure to comply with
this manual.
Observe the accident prevention regulations, as well as other standard safety and
occupational health rules.
Competences regarding various aspects of maintenance and repairs must be clearly
defined and adhered to. This is the only way to avoid failures - especially in
dangerous situations.
The operator shall ensure service and maintenance personnel to use personal
protective equipment. This includes safety footwear, protective glasses and gloves.
The personnel must not have long loose hair, loose clothing or wear jewellery! In
principle, your hair can get caught by the device or hit by moving parts of the
instrument!
In the case of safety-related changes to the MiniFil device stop the suction
immediately and secure it against re-starting and report the event the appropriate
workplace/person!
Work on the MiniFil device can only be carried out by reliable and trained staff.
Observe the legally permitted minimum age limit!
Trainees, apprentices or other staff being trained or instructed may manipulate with
the MiniFil device only under constant supervision of an experienced person!
- 41 –
Technical changes and errors reserved.