Philips SC2002/00 Mode D'emploi page 29

Problem
The treated areas
become red after the
treatment.
The skin reaction after
the treatment lasts
longer than usual.
The hair-removal results
are not satisfactory.
Possible cause Solution
The appliance is Do not use the appliance if you have a very dark skin.
not suitable for Do not use it either if your body hair is light blond, red,
your skin colour. grey or white.
Slight redness No action required.
is harmless and
normal and
disappears quickly.
You have used Select a lower light intensity the next time. See chapter
a light intensity 'Preparing for use', section 'Setting the light intensity.
which is too high
for you.
If the skin reaction lasts longer than 3 days, contact
your doctor.
You have used Select a higher light intensity the next time.
a light intensity
which is too low
for you.
You did not make For proper hair-removal results, you have to make
enough overlaps overlaps when you use the appliance. See chapter
when you used 'Using the appliance', step 11.
the appliance.
You do not use To remove all hairs successfully and to prevent the
the appliance hair root from becoming active again, the treatments
as often as have to be repeated once every two weeks for the
recommended. first two months. To ensure that your skin stays smooth
and hair-free, we advise you to repeat the treatment
every four to six weeks. The time between treatments
may vary based on your individual hair regrowth and
also across different body areas. If too many hairs
grow back between treatments, simply shorten the
treatment interval again, but do not treat any area
more often than once every two weeks. When you use
the appliance more frequently than recommended, you
do not increase the effectiveness but you do increase
the risk of skin reactions.
The appliance is Do not use the appliance if your body hair is light
not suitable for blond, red, grey or white. Do not use the appliance
your hair or skin either if you have very dark skin.
colour.
EngliSh
29