Lanaform Eyes Massager Manuel D'utilisation page 25

How to install the battery
1. Open the cover and insert four AA batteries
2. Take care to install the batteries correctly in the regulator.
3. Close the cover of the regulator.
Precaution:
• Check the anode (sign -) and the cathode ( sign +) of the battery. The batteries must be installed correctly. Check
that the cover is closed correctly over the batteries. To identify the anode and the cathode, refer to the battery
installation diagrams in the battery compartment.
• Always use alkaline batteries to protect the appliance.
Connecting the adaptor
If you are using an adaptor, be sure to take the batteries out before you plug it in.
Technological index
Working environment:
Temperature:5 degrees~40 degrees
Relative humidity: <80%
Air pressure: 860hPa ~ 1060hPa
Intensity of the magnetic fi eld: >200Mt
Vibration frequency: 40Hz~100Hz
Heating temperature: 300 °C ~ 45 °C
Energy input:
AC (alternative current): 220V+_ 22V, 50Hz+_ 1Hz
DC: 6V
Power: < 4W
Weight: <0.5kg
Outer dimension: 25cm x 25cm x 8cm (L X W X H)
Maintenance
Do not clean your mask with water; clean it with alcohol.
Unplug the appliance or the transformer before cleaning the appliance.
Store the appliance carefully after each use. Do not put heavy objects on the surface of the appliance.
Take care to prevent this appliance from coming into contact with water.
25