Rollei Actioncam 530 Mode D'emploi page 5

1.Inserting micro SD Card
Note: Please choose branded microSD card and format the memory card using a computer or the camera
before the first use.
2.Installing and removing the battery
A. The battery compartment can be secured against accidently opening. Therefore, you find a lock button
on the battery compartment. To open the battery compartment unlock it and slide it in the direction
shown on the cover.
B. Install the battery into the camera as indicated by +/- symbols and direction of arrows marked on
battery.
C. Battery power, refer to the symbols: Full power mode"
D. Remove the battery: Open the battery cover and take the battery out.
Note: Please push the lock catch every time to the position of "LOCK" before using the device.
3.Battery Charging
A. The battery can be charged by connecting it to a computer or a power adapter.
B. Camera can record videos while charging (switch into vehicle-mounted mode in the Menu).
C. The camera can also be charged if the camera is turned off.
4.Power mode
Press and hold the power button for 3-5 seconds to turn it on/off.
5.Mode Switching
Switching between video recording/photo shooting/playback/menu by pressing power button shortly and
repeatedly.
Operation
" low power mode"
5
EN
".