Technical Specifications - Twinkly Pro Connection Hub Guide D'instructions

READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1. Read and follow all safety instructions.
2. Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of
heat.
3. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
4. This is an electric product - not a toy! To avoid risk of fire, burns, personal injury and electric shock it
should not be played with or placed where small children can reach it.
5. Do not use this product for other than its intended use.
6. Do not hang ornaments or other objects from cord, wire, or light string.
7. Do not cover the product with cloth, paper, or any material not part of the product when in use.
8. Do not close doors or windows on the product or extension cords as this may damage the wire
insulation.
9. Read and follow all instructions that are on the product or provided with the product.
10. Save these instructions.
USE AND CARE INSTRUCTIONS
a. When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place
on live trees in which the needles are brown or break off easily. Keep the live tree holder filled with
water.
b. Once the product is placed, the installation should be well secured and stable.
c. Before using or reusing, inspect the product carefully. Discard any products that have cut damaged,
or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or
exposed copper wire.
d. When storing the product, carefully remove the product from wherever it is placed, including trees,
branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and
wires.
e. When not in use, store neatly in a cool, dry location protected from sunlight.
ATTENTION – TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK
a. Do not install on surfaces having sharp edges, or coverings of metal or materials which look like
metal.
b. Do not mount or support wires in a manner that can cut or damage wire insulation.
Class A Disclaimer: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
i. Reorient or relocate the receiving antenna.
ii. Increase the separation between the equipment and receiver.
iii. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
iv. Consult the dealer or an experienced radio/television technician for help.
WARNING!
The connecting cable cannot be repaired or replaced. CAUTION! Strangulation hazard. Keep out of reach
of young children.
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from
household waste. The item should be handed in for recycling in accordance with local environmental
regulations for waste disposal.

TECHNICAL SPECIFICATIONS

No. of ports
IP rating
Connectivity
Power rating
Passive PoE IN
Passive PoE OUT
Temperature range
Storage temperature range
Warranty
8
IP65
Ethernet
3 W MAX
24V MAX
24V MAX
-15°C / 40°C | 5°F / 104°F
-20°C / 60°C | -4°F / 140°F
12 months