Floor Mounting - Harman JBL Fuse Guide D'installation

MOUNTING THE FUSE
Vertical mounting
1. Select a suitable location in the cargo area or trunk.
2. Use the included screws to secure the feet to the mounting surface.
NOTE: Before drilling pilot holes for the mounting screws, check beneath the mounting surface to ensure you will not
puncture fuel lines, brake lines, or any vehicle wires.
Separating the twin enclosures
1. Remove four screws securing the mounting feet; remove mounting feet.
2. Remove speaker grilles.
3. Remove four (4) bolts securing twin enclosures.
4. Separate twin enclosures.
EN

Floor mounting

1. Select a suitable location, such as under a seat.
2. Use the included bolts to secure to the mounting surface.
3. Replace speaker grilles.
2