CAPITAL SPORTS Evo Air PRO Mode D'emploi page 54

EN
7
Fix the handle bar (8) on the front post (7) with flat washer (55) and screw
(63) tightly.
Connect the console wire-top(14), speed sensor wire –top (64) together
with the wire on the console (9) correctly, please ensure that all the pins
are straight when connecting.
Fix the console (9) on the plate of the front post (7) with the screws (68)
tightly.
Note: Now the equipment is completed assembled, if you find it not
leveled on the floor, you can adjust it by the adjusting rear stabilizer tube
plug(13). Make sure you have tightened all the screws and nuts well before
beginning your workout.
54