Safety Instructions; Wall Mount - UFESA BP4570 Mode D'emploi

ENGLISH
This appliance is designed for processing normal house-
hold quantities in the home or similar quantities in non-
industrial applications. Non-industrial applications in-
clude e.g. use in employee kitchens in shops, offices,
agricultural and other commercial businesses, as well as
use by guests in boarding houses, small hotels and simi-
lar dwellings. Use the appliance for processing normal
quantities of food for domestic use.
Please retain the operating instructions. If passing on the
appliance to a third party. always include the operating
instructions.
OVERVIEW
Fig. 1
1. Base unit
2. ON button
3. Turbo button, maximum speed
4. Speed selector
5. Foot with blade

6. Wall mount

7. Mixing jug.
8. Lid for mixing jug.

SAFETY INSTRUCTIONS

• Only connect it to the voltage indicated on the cha-
racteristics plate.
• This appliance is suitable for use with foods.
• This appliance has been designed exclusively for do-
mestic use.
• Do not handle the appliance with wet hands.
• Avoid contact with the moving parts.
• Do not touch the blade while it is operating as it is
very sharp. After the appliance has been switched off
the blade will continue to rotate a moment longer.
• When using the mincing accessory:
- The edge of the blade is very sharp. Handle with care
to avoid any cuts. Always use the plastic handle.
- Always place the container on a clean, level surface.
- Grip the blender firmly during use.
• Never insert metal utensils, such as knives or forks, into
the inside of the cowl while the appliance is operating.
• Do not operate the appliance without a workload.
• Do not use the appliance with hot oil, as there is a risk
of burns due to splashing.
• Do not place the appliance near sources of heat and
prevent the cable from brushing against hot surfaces.
• Do not operate the appliance with the cable still
coiled.
• Do not leave the appliance operating unattended, es-
pecially with children about.
• This appliance must not be used by persons (inclu-
ding children) with physical, sensory or mental impair-
ments unless they have been instructed in its correct use
by a responsible adult.
• Children must be supervised to ensure that they do
not play with the appliance.
• Unplug the appliance from the mains when it is not in
use.
• Do not unplug it by tugging on the cable nor leave the
plug hanging freely.
• Make sure that the appliance has been unplugged be-
fore cleaning it.
• DO NOT IMMERSE THE APPLIANCE IN WATER OR ANY
OTHER LIQUID.
• The foot with the blade must only be fitted or remo-
ved with the appliance switched off.
• Do not switch the appliance on if the cable or the plug
are damaged or if it can be detected that the appliance
is not working correctly.
• Cable repairs and replacements must be carried out
exclusively by an Authorised Technical Service Centre.
SAFETY DEVICES START LOCK-OUT
If motor stops during operation, unplug the appliance
and cool it down for 5 minutes.
Overload protection switches on.
Possible causes:
- The food has jammed the blender blade.
- Too much pressure exerted on the food during the
cutting process.
Eliminate the cause and switch on the appliance again
after cooling period.
WALL MOUNT
BP4576 / BP4578 / BP4585
Figure 2 and 3
To fix the support to a wall, drill two holes and attach
the support by means of the wall plugs and screws whi-
ch are supplied