Operation - Bartscher 100201 Mode D'emploi

5.3 Operation

Toasting
•
Before first use, please check the toast slots for leftovers of packing material or other
objects.
•
Clean the toaster surface using a mild cleaning agent and a soft, damp cloth. Dry the
device properly afterwards.
•
Due to oils used during manufacturing process, at first use the device may develop a
stinging smell and light smoke. This is absolutely normal for a new device.
•
Connect the device to a grounded single power socket.
•
The 4 slice toaster is provided with separate controls for the each of the slot pairs.
•
The following work steps are relevant for both of the slot pairs.
•
Please set the desired browning stage (1 - 7).
•
For stronger browning effects turn the rotary stage control clockwise, for less
browning turn it anti-clockwise.
NOTE!
When using the 4 slice toasters, make sure that both of the rotary stage controls
are set appropriately for the simultaneous toasting of different kinds of toast or
when different browning effects are desired.
•
Insert the toast slices into the toast slots.
•
Press down the spring lever until you hear a click-sound.
•
When toasting process is finished, the lever automatically jumps upwards and the
toasts may be taken out.
CAUTION!
In case a toast slice is canted, the device automatically switches off.
In this case, disconnect the device from the power socket (Pull the power plug!).
Move the spring lever up and down for a few times in order to loosen the toast slice.
Do not at any time use any kind of kitchen utensils in order to remove the jammed
toast slice!
- 24 -