Bartscher 100201 Mode D'emploi page 27

Bun holder
•
Press down the spring lever until you hear a click-sound.
•
After completion the spring lever jumps upwards.
•
You may remove the buns from the holder.
WARNING! Danger of burns!
Immediately after the toasting process, the bun holders are still very hot.
Please do not touch the bun holders with your bare hands.
In order to avoid injuries, make sure you use safety/oven gloves or pot holders
when removing the bun holders!
•
Disconnect the device from the power socket (Pull the power plug!) while it is
not in use.
Crumb-tray
•
Reinsert the crumb tray after cleaning. Please ensure that the crumb tray is
completely reinserted into the provided opening.
CAUTION!
In order to avoid damages or soiling of the device, the toaster must be operated
with the crumb tray properly inserted at all time.
•
The toaster is provided with one/two
adjustable bun holders. These are
clamped into the toast slots.
•
In order to warm or roast buns just place
them on top of the bun holders and set
the desired browning stage via the rotary
stage control.
•
The extensible crumb-tray can be found at the
bottom of the device. The 4 slice toaster is
provided with 2 crumb-trays.
•
Empty the crumb-tray regularly. In order to do so,
just pull it out and remove the crumbs. If necessary,
wipe off the tray with a soft, damp cloth.
•
Before reinserting the tray, make sure it has been
dried properly.
- 25 -