Description; Purpose; Overview; Packing List - GreenWorks G48LT30 Manuel Opérateur

EN
1

DESCRIPTION

1.1

PURPOSE

This machine is used to cut grass, light weeds, and other
similar vegetation at or around ground level. The cutting
plane must be approximately parallel to the ground surface.
You cannot use the machine to cut or chop hedges, shrubs,
bushes, flowers and compost.
1.2

OVERVIEW

Figure 1 - 16.
Trigger
1
Lock-out button
2
Auxiliary handle
3
Upper shaft
4
Cam lock
5
Lower shaft
6
Edger button
7
Cut-off blade
8
Edge guide
9
Trimmer head
10
Guard
11
Edger wheel
12
Pivoting button
13
Screw
14
Knob
15
Groove
16
Battery release button
17
Spool cover
18
Tab
19
Spool
20
Spool housing
21
Hole
22
Anchor hole
23
Guide slot
24
Spool retainer button
25
Direction of rotation
A
Best cutting area
B
Dangerous cutting area
C
1.3

PACKING LIST

1 String trimmer bare
tool
2 Auxiliary handle
assembly
English
3 Guard assembly
4 Operator manual
2 GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your battery-
operated (cordless) power tool.
3

INSTALLATION

3.1

UNPACK THE MACHINE

WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
• If parts of the machine are damaged, do not use the
machine.
• If you do not have all the parts, do not operate the
machine.
• If parts are damaged or missing, contact the service
center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in compliance with
local regulations.
WARNING
For your personal safety, do not insert battery before the
tool is assembled completely.
3.2

ATTACH THE GUARD

Figure 2.
WARNING
Do not touch the cut-off blade.
1. Remove the screws from the trimmer head with a Phillips
head screwdriver (not included).
2. Install the guard into the slots on trimmer head.
3. Turn the guard counterclockwise to lock it into place.
4. Align the screw holes on the guard with the screw holes
on the trimmer head.
5. Tighten the screws.
4