Awox Striim Control Setup - Awox SLC-W13 Mode D'emploi

EN

AwoX Striim CONTROL setup

1. After downloading the
application, tap on the
launcher icon to run AwoX
Striim CONTROL. You must
be connected to your local
WiFi network.
2. If StriimCONTROL does not
detect a StriimLIGHT device
in your network, the setup
wizard starts when you
launch the application.
3. Choose Configure a new
audio device, then install
AwoX StriimLIGHT WiFi.
4. The wizard guides you through all the steps for connecting
your AwoX StriimLIGHT WiFi Color device to your local
network to begin playing your music.
Once the device is connected to your network, it will
automatically reconnect each time you turn it on.
8 | AwoX StriimLIGHT WiFi Color - User Guide
www.awoxstriim.com