How To Replace: Lamp - AEG BEK435060M Notice D'utilisation

Masquer les pouces Voir aussi pour BEK435060M:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 86
Step 4
Hold the door trim (B) on the top
edge of the door at the two sides
and push inwards to release the clip
seal.
Step 5
Pull the door trim to the front to re‐
move it.
Step 6
Hold the door glass panels on their
top edge one by one and pull them
up out of the guide.
Step 7
Clean the glass panel with water
and soap. Dry the glass panel care‐
fully. Do not clean the glass panels
in the dishwasher.
Step 8
After cleaning, do the above steps
in the opposite sequence.
Step 9
Install the smaller panel first, then the larger and the door.
Make sure that the glasses are inserted in the correct position otherwise the surface of the door
may overheat.

11.5 How to replace: Lamp

WARNING!
Risk of electric shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until the
oven is cold.
Top lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
B
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
2
Put a cloth on the bottom of the cav‐
1
Step 3
ity.
ENGLISH
55

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Eb40m

Table des Matières