Maintenance And Cleaning; Declaration Of Conformity - Berner BROS-150 T Instructions D'emploi

Masquer les pouces Voir aussi pour BROS-150 T:
Table des Matières

Publicité

bros150t_bu_3609929A92_t.fm Seite 6 Montag, 10. Juli 2006 10:00 10

Maintenance and Cleaning

Before any work on the machine itself, pull the
I
mains plug.
Always keep the machine and the ventilation slots
I
clean for proper and safe working.
When the sanding plate is changed (see Changing the
Sanding Plate), check the sealing collar 10 for dam-
age. Have a damaged sealing collar replace by Berner
customer service.
WARNING
Important instructions for connecting a new 3-
pin plug to the 2-wire cable.
The wires in the cable are coloured according to the
following code:
Strain relief
Live = brown
Neutral = blue
Do not connect the blue or brown wire to the earth ter-
minal of the plug.
Important: If the plug on the cable of this machine
must be replaced, dispose of the old plug to prevent
misuse.
Should the machine fail in spite of the care taken in the
manufacturing and testing procedures, the repair is to
be performed by an authorised customer service loca-
tion.
For all inquires and replacement parts orders, always
include the article number from the nameplate of the
machine.
3 609 929 A92 • (06.07) T
Disposal
Power tools, accessories, and packaging should be
disposed of for recycling in an environmentally friendly
manner.
Only for EU countries

Declaration of Conformity

We declare under our sole responsibility that this prod-
To be fitted
uct is in conformity with the following standards or
by qualified
standardization documents:
professionals only
EN 60745 according to the provisions of the directives
89/336/EEC, 98/37/EC.
Jörn Werner
CEO
10.07.2006, Berner GmbH; Bernerstraße 6;
D-74653 Künzelsau
Specifications subject to change without notice
English–6
Do not dispose of power tools in
household waste!
According to the European Guide Lines
2002/96/EC for waste electric and
electronic equipment and its imple-
mentation into national law, power
tools that are no longer usable must be
collected separately and recycled in an
environmentally friendly manner.
Ulrich Lindner
COO

Publicité

Table des Matières
loading

Table des Matières