Installing The Device - Berbel AutoRun 2.0 Manuel De Montage

Installation
3.3

Installing the device

300
☞ Install the device between the hob
and floor. When doing so, observe the
installation requirements.
D "3.1 Safety instructions for
installation" (page 45).
☞ Ensure that the mains and electrical
connecting cables are not kinked,
crushed or damaged.
☞ Ensure that the hob is not in use.
If necessary, additionally fasten the
device using suitable screws.
46
☞ Fasten the electronics box to the hob
supply line with cable ties.
☞ Connect the wall power supply with
the electronics box.
☞ Plug the mains plug into the socket.
6005300_a – 17.03.2021