Connection & Operation - Inakustik Premium HDMI Switch Mode D'emploi

Manual
10
HDMI SWITCH
Connection & operation
Connection
Step 1:
Connect the HDMI cables from the HD sources (PS3, DVD
player...) to the input ports of the HDMI Switcher.
Step 2:
Connect the HDMI cable from your HD display (monitor or
projector) to the output port of the HDMI Switcher
Step 3:
Plug the 5VDC power adaptor to the HDMI Switcher.
Step 4:
After you finish the connection, the power indication LED (red)
will be lighted on. And one of the input indication LEDs (green)
will be light on.
Note:
1. The SELECT button can also be used as a POWER ON/OFF button.
Press the button for 3 seconds to turn on or off the power.
2. If you see the power indication LED light (Red) is flashing, the
HDMI switcher is detecting and connecting to the source. After
the source is detected and connected, the flashing will stop. If
the flashing continued, please check the power of your source is
on, or check the HDMI cable is working fine
3. The HDMI switcher will memorize the latest input port.