Connection And Operation - Inakustik Exzellenz HDMI MATRIX High Speed Mode D'emploi

Connection & operation
1. Connect the HDMI input source into Excellence HDMI Matrix High
Speed
*please refer to connection diagram section.
2. Insert the DC side of 5v power supply into Excellence HDMI Matrix
High Speed and then connect the AC side of the power supply into
the wall outlet.
For this product, there are different operation for your choice
1. Press the button POWER on
Once the power button is pressed, the two outputs will select the
two inputs sources on the sequence. (source is in working
situation)
2. Mechanical switching.
The button Select A can select four sources to display on the
Output A device circularly;
The button Select B can select four sources to display on the
Output B device circularly.
3. Remote control
The Power button on the remote control can control this product.
The two OFF buttons can control the output A/B seperately, in
order to not keep output A/B's device working. The button 1/2/3/4
can select source devices freely. Two buttons: QUERY will tell you
intelligently which soucre device is chosen by the Output A and
Output B. When you press the button "QUERY", the led of the
corresponding device will twinkle half seconds.
LED indication function:
when any input source device works or any output sink devices
works (which is connected to Exzellence HDMI Matrix High Speed),
the color of LED relative to the device will be red.When the users
select one of the input resource output to the display devices ,the
color of LED for this input interface is blue.
HDMI MATRIX 4->2
Manual
11