Inakustik Premium HDMI Switch Mode D'emploi page 11

Manual
HDMI SWITCH
Connection & operation
Operation
IR Remote Control operation mode
Use the IR remote controller to turn on the power of HDMI switcher,
the power indication LED on the front panel will light on. In the IR
remote control mode, use number button to toggle between sources,
or you can use the forward and back button to select input sources.
Manual Operation mode
This box can be use manually; the "POWER/SELECT" key is used for
manual switch. If you want to change the input channel, you can only
press the button once. There will be a LED indication for what channel
it is.
The procedure is a cyclic function
When you selected the channel, there will be a LED on to present the
channel. If you select channel 1, the "1" LED will light on.
11