Luvion easy Manuel D'instructions page 7

: Before permanently installing the baby unit (camera), make sure that the wireless connection
NOTE
between the baby unit and parent unit is su cient. Verify this when both the parent unit and baby unit are
placed in the positions from which you would like to use them.
: Avoid installing the baby unit near walls or other obstruction between the baby and parent unit. For a
NOTE
good sound sensitivity and image it is recommended to place the baby unit between a 1,5-3m distance .
3. Connect the power adapter to the baby unit and a power socket.
4. Push the power button up to switch the baby unit (camera) on.The power LED will now light up.
The parent unit will display the video of the baby unit, when both are switched on and within range of each
other. The message "Connecting" will be displayed on the screen of the parent unit when the baby unit is
outside the range of the parent unit or when the baby unit is not switched on or recognized.
LUVION
Premium Baby products
7