Publicité
Les langues disponibles
Les langues disponibles
Hyundai Coupé
04/2002 - ....
Ref. 1369
Fitting instructions
1)
Remove the exhaust in the rear. Disassemble the bumper and the buffer beam and permanently remove
the supports of the buffer beam.
2)
Insert the tow bar with the supporting arms in the opening of the chassis beam. The points (A) match the
provided drillings in the side of the chassis beam, points (B) match the drillings at the bottom of the
chassis beam. Insert the bolts and the washers and tighten the bolts firmly on.
3)
Make an incision in the buffer beam (see drawing) and assemble the buffer beam with the delivered bolts
and washers on points (C) of the tow bar.
4)
Cut away the middle of the fixing strip and assemble the bumper on the vehicle.
5)
Assemble the ball (*) and tighten firmly.
Composition
1 tow bar reference 1369
1 ball T43H001
4 bolts M12x40 - DIN933
4 security washers M12 - DIN128A
1 security shackle (-s)
6 bolts M10x35 - DIN933
6 security washers M10 - DIN128A
6 washers 40x35x12x4mm
4 bolts M8x35 - DIN931
4 nuts M8 - DIN934
4 security washers M8 - DIN128A
8 washers 25x8x2
All bolts and nuts : quality 8.8
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*)
(*)
(*)
(*)
(A-B)
(A-B)
(A-B)
(C)
(C)
(C)
(C)
Publicité
