Cleaning And Maintenance; Technical Specifications - Roller Grill RFE 8 D Notice D'installation Et D'utilisation

Safety thermostat
In case of overheating or lack of oil, your deep fryer will automatically stop. Unplug it and
let it cool. Then check the oil level:
1) Oil level is too low: add some oil and reload the knob located under the control box.
2) Oil is too old: change it and reload the knob.
3) Other cases: call your after sale service
Stopping the appliance
- Set the thermostat control knobs to zero.
- Unplug the appliance.
- Let the device cool.
- To reuse the oil, open the draining tap and pour the oil through a filter to eliminate the
cooking residues
- Clean the appliance (See 6.Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and confide any
technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him the complete
reference of your device (commercial name, type and serial number). This information appears on
the visible descriptive plate behind the device.

6. CLEANING AND MAINTENANCE

- Let cool completely the device and the oil before any technical intervention or cleaning.
- Unplug the machine and remove the control unit before cleaning.
- For cleaning, only use non-abrasive products, clean regularly the external walls of your device
with warm water and wash liquid: avoid the abrasive towelling. Rinse your device with a wet
sponge.
- Never immerse the control unit in the water.
- Caution : do not damage the heating element wires during cleaning.
- Never clean the device under a water jet.
- During a prolonged non-use, we recommend you strongly to keep the device shielded from the
humidity.

7. TECHNICAL SPECIFICATIONS

Model
Power
Outside dimensions
Volume
Nb element
Voltage
Current
Weight
Maximum charges (Kg)
RFE 8 D
2 x 3000 W
400x600x465 mm
2 x 8 L
2
2 x 220-240 V ~
13 A/Phase
30 Kg
1.2 per basket
18